
Decorative Christmas tree: six small trees with Nordic silhouettes
Six small decorative Christmas trees to display: clean tiers, ripples, bulges, spiral or round volumes. From 13 to 18.5 cm and from €10 to €27, printed to order in Guérande in around twenty colours.
By L'atelier RE3DLINE
A small decorative tree is chosen first by its silhouette: clean tiers, tight undulations, bulges, spiral or rows of round volumes. Our six decorative Christmas trees measure from 13 to 18.5 cm and cost from €10 to €27. They are made to order in our Guérande workshop, in around twenty colours, at no extra charge.
A Christmas tree to display, not to decorate
A decorative Christmas tree has no needles, no branches, no garland to hang. It is a display object, like a vase or a statue: it takes its place on a piece of furniture at the start of December and makes its mark through its form. All the decoration is in the relief.
Our six models bear Nordic names and share the same vocabulary: a cone, vertical ribs that catch the light, and each one's own way of rising to the point. Their descriptions speak of "Nordic", "Scandinavian" or "contemporary" decorations. None imitates the needles of a real fir tree.
Three questions are enough to choose. What silhouette, first: angular or rounded, in tiers or all in one piece. What height, next: a single tree or a group of different sizes. What colour, finally: the expected green, festive red, or a neutral that will remain after the holidays.
Not to be confused with the Yuki Sapin (€5, 5.5 × 5.5 × 9 cm): that one is a decoration fitted with a ring, made to be hung from a branch. The six trees in this article are for display. This silhouette approach is that of our entire Christmas collection, figurines included, as shown in gnome, casse-noisette, renne, père Noël : figurines de Noël revisitées.
GRAN, clean tiers with straight ribs
The GRAN is the most geometric of the six. It rises in stacked tiers, each pleated with vertical ribs, with a sharp edge at each level. The top ends in a small stepped cone. Its description says it is "inspired by contemporary fir trees".
It costs €10 in 13 cm (8.5 × 8.5 × 13 cm), the entry price of the series along with the Lund. Its straight lines call for bold colours: Khaki Green for the expected tree, Matte Black for a graphic version, Deep Red for the festive note.
Isen, tight undulations up to the point
The Isen takes up the principle of tiers, but in rounded form. Numerous tight undulations follow one another from the bulging base to the top, without edges, all covered with fine vertical ribs. The top tapers to a fine point.
It costs €12 in 13 cm (9 × 9 × 13 cm). It is the densest of the six: grazing light catches in each undulation. In Matte Black, it becomes a graphic silhouette; in Ivory White, it is the shadows of the ribs that define it.
Furu, rounded bulges and a button at the top
The Furu stacks rounded tiers, like bulges placed one on top of the other, above a more bulging base. The vertical ribs run the full height. Unlike the Isen, it does not end in a point but in a small rounded button. Its description says it "revisits traditional Christmas decorations".
Two sizes: 8 × 8 × 13 cm at €12, 10 × 10 × 18.5 cm at €18. It is the tallest of the series. The two formats side by side cost €30, and Deep Red gives it the look of an old-fashioned Christmas decoration, redesigned.
Havn, three bulges and a tapered point
The Havn has the softest silhouette: three stacked bulges, from widest to narrowest, then a tapered point. No tiers, no edges, continuous curves covered with fine ribs. Its description speaks of a "slender silhouette".
It comes in 7.5 × 7.5 × 14 cm at €16 and in 10 × 10 × 18 cm at €27. It is the most expensive piece in the series in large format, and the one that needs company least: a single 18 cm Havn is enough on a console. In Ivory White, it evokes snow without adding any.
Lund, a twisted cone, without tiers
The Lund breaks with tiers. It is a cone whose folds spiral from base to point, like twisted fabric. At the bottom, the folds open out and form a scalloped edge. Its description characterises it by its "minimalist silhouette" and "clean lines".
Two sizes, at the same width: 11 × 11 × 14 cm at €10, 11 × 11 × 18 cm at €12. The two formats side by side cost €22. It is the widest of the six at the base: allow a little more space on the shelf. Its spiral reads better in a solid, matte colour, Khaki Green or Beige, than in a very dark tone.
Skog, rows of round volumes in a striped pattern
The Skog is constructed differently: rows of small rounded volumes, stacked in a cone and split by vertical lines. Its description speaks of "textured lines" and a design "inspired by Nordic forests".
It measures 9 × 9 × 15 cm and costs €14, in a single size. It is ordered in a striped pattern: it is the striped piece in the foreground of the photos on its page. Between the straight tiers of the GRAN and the spiral of the Lund, it is the most sculptural of the series, the one you display alone so it can be seen.
Three trees of different heights make a small forest
A single tree is an object. Three trees of different heights form a landscape. The series ranges from 13 to 18.5 cm, and its silhouettes mix without difficulty because they share the same vertical ribs.
One form, two sizes. The Furu in 13 and 18.5 cm (€30), the Havn in 14 and 18 cm (€43) or the Lund in 14 and 18 cm (€22): the repetition of the form makes the set.
Three forms, one colour. An 18 cm Havn, a 13 cm Furu and a 13 cm GRAN, all in Khaki Green: €49. The common colour links different silhouettes.
One form, three colours. Three 14 cm Lunds in Ivory White, Beige and Wood: €30. A winter forest, without red or green.
The colour does not change the price of any of these trees: only the size does. Each is printed in a single colour, to be chosen from around twenty colours, including Khaki Green, Deep Red, Ivory White, Matte Black, Wood or Marble Sandstone. The logic of combinations is detailed in vase 3D personnalisé couleur : composez le vôtre.
The small tree goes where a large one will not fit
A tree of 13 to 18.5 cm finds its place where a real tree will not fit: a studio, an office, a narrow entrance, a bedside table.
On an entrance console. An 18 cm Havn, alone, welcomes guests on Christmas Eve.
On a shelf or in a bookcase. The trio of heights, between two rows of books, at eye level.
On a desk. A 13 cm GRAN or Isen, next to the screen, for the whole of December.
On the Christmas Eve table. Two small trees in the centre, surrounded by low candle holders: this composition is detailed in table de Noël : bougeoirs, centre de table et pièces sobres.
Two precautions relate to the material. Our trees are printed in biosourced PLA, which begins to soften around 55 to 60 °C: no tree on a radiator, on the mantelpiece of a lit fireplace or near a flame candle. To light it, an LED garland placed around it or a side lamp, which brings out the ribs. If you add a candle next to it, an LED tealight candle, never a flame: the rule is explained in porte-bougie imprimé en 3D : quelle bougie mettre dedans. For maintenance, a barely damp cloth, cold; the strength of a printed piece is detailed in un objet imprimé en 3D, est-ce vraiment solide et durable.
Finally, nothing requires you to put it away on 6 January. In Ivory White, Beige or Wood, a ribbed tree remains a winter piece on a shelf.
Printed after your order, tree by tree
None of these trees waits in stock. Your order arrives at our Guérande workshop, the spool of the chosen colour is mounted on a printer, then the tree is printed, deburred, checked and packed. Allow 5 to 7 days of production before dispatch, then the delivery time.
For a tree in place at the start of December, ordering in November leaves a comfortable margin. This is advice, not a guaranteed date: for a specific date, contact us before ordering. Delivery in France costs €6.90 per order, free from €80 purchase.
The six trees can be found in the Noël collection, with the figurines and hanging decorations. To give one as a gift, our idées cadeaux de Noël fabriqués en France, par budget classify the catalogue by price bracket. The workshop's operation is described in une heure dans l'atelier RE3DLINE. For a shop looking for seasonal trees, our professionnels page details what we offer.
Frequently asked questions
- How tall is a small decorative tree?
- Our six trees measure from 13 to 18.5 cm. The GRAN and the Isen come in 13 cm, the Furu in 13 or 18.5 cm, the Havn and the Lund in 14 or 18 cm, the Skog in 15 cm. Prices range from €10 to €27 depending on the model and size.
- Which decorative Christmas tree should I choose?
- First choose the silhouette: clean tiers for the GRAN, tight ripples for the Isen, rounded bulges for the Furu, three swellings for the Havn, spiral for the Lund, striped round volumes for the Skog. Then the height: a single 18 cm tree on a console table, two or three in different sizes on a shelf.
- Can I choose the colour of my decorative tree?
- Yes. Each tree can be configured in around twenty colours, including Khaki Green, Deep Red, Ivory White, Matte Black or Wood. The colour does not change the price: only the size does. The tree is printed in a single colour, the one you choose.
- Does a decorative PLA tree fear heat?
- Yes, above 55 to 60 °C, the temperature at which PLA begins to soften. Avoid the top of a radiator, the mantel of a lit fireplace and any flame candle nearby. To light it, use an LED string or an LED tea light.
- What is the difference between a small decorative tree and a tree decoration?
- A decorative tree sits on furniture: our six models measure from 13 to 18.5 cm. A tree decoration hangs from a branch: the Yuki Sapin, for example, has a ring and measures 5.5 × 5.5 × 9 cm, for €5.
- When should I order a decorative Christmas tree?
- Allow 5 to 7 days of production before dispatch, then delivery: each tree is printed to order in our Guérande workshop. Ordering in November leaves a comfortable margin for decorations in place by early December. This is advice, not a guaranteed date.